10mm Toughened Anti-Reflective Glass Museum Glass Wholesale Price

10mm Toughened Anti-Reflective Glass products can be bespoke size applied for museums, stadiums, showrooms, etc. 

AR Glass (Anti-reflection glass), is a coating glass product and has a high visible light transmission (VL≥ 99%)and very low visible light reflectance (VR≤ 1%). Adopt grade A 10mm ultra clear float glass as coating materials, taking advantage of perfectly flat surfaces. Taking advantage of the technological magnetron sputtering coating equipment, sputter the target material on the glass surface (it can be one side or two sides) through the magnetic pole under the vacuum environment.

Compared with ordinary ultra clear glass, the anti-reflective glass has a lower reflectance, and can reduce the reflectance of light to less than 1%. Because 10mm AR glass has an anti-reflective coating layer, it adopts hard coating and can be cut/tempered/laminated or insulated.

For the specification of 10mm toughened AR glass, you can refer as below table.

1. Gain more visible light transmittance

Visible light transmittance of laminated glass 10mm single-sided anti-reflective tempered glass#1+1.52SGP+10mm single-sided anti-reflective tempered glass#4 can be as high as 99%.

2. Non-reflective

The reflectivity is less than 1%, and the minimum value is less than 0.5%, which effectively reduces the defect of the screen turning white due to the strong light behind, and enjoys a clearer image quality.

3. No color cast

The colors are more vivid and the contrast is stronger, making the image color contrast stronger and the scene clearer.

4. Effectively isolate UV rays

Anti-ultraviolet effectively protects the eyes and cultural relics damage, and the transmittance of the ultraviolet spectral region is greatly reduced, which can effectively block the damage of ultraviolet rays to the eyes.

5. High-temperature resistance

AR glass temperature resistance > 500 degrees (generally acrylic can only withstand 80 degrees)

6. The best scratch resistance and wear resistance

The hardness of the AR glass film layer is equivalent to that of glass, greater than 7H, (generally the hardness of the PC board is about 2H to 3H).

7. Durability of coating

8. Strong impact resistance, can withstand typhoons, thunderstorms, hurricanes, etc. They are good hurricane proof glass products.

9. Maintain perspective

Generally, after acrylic is installed, the viewing angle will become smaller; but after AR glass is installed, the viewing angle will not become smaller.

10. Appearance

The surface flatness of the AR laminated glass railing is much better than that of coated acrylic, and the larger the size, the more obvious the difference. The hot and cold deformation of Anti-reflective glass can be almost ignored, and it is suitable for stadiums.